PRODUCT 

"TWO-FOLD" BENEFITS OF ULTRA CUSHION INSOLES are:
to provide:

an insole with EXCEPTIONAL CUSHION, COMFORT & SHOCK ABSORPTION, but also - as a BONUS - due to their self-moulding ability, ......

 to provide:

OVERALL "INDIVIDUAL" CUSHIONED SUPPORT for the WHOLE FOOT so as to help PREVENT painful/problem areas developing, and/or ALLEVIATING existing painful/problem areas - so people with heel spurs, heel pain, arch pain, fallen arches, flat feet, neuromas, plantar fasciitis, ball of the foot pain (or just plain sore feet) etc are also benefited.
  • Ultra Cushion Shoe Insoles are made from a special blend of E.V.A., black in colour and manufactured in Australia. They are suitable for a WET or DRY environment. 
  • Available in two heel thicknesses, 11mm and 7mm - both tapering to 3mm (approx.) under the ball of the foot. The extra heel thickness is necessary to produce the desired 'moulding' effect and transference of weight away from any "sore areas". The 11mm heel thickness is recommended for people with heels spurs, heel pain, arch area pain, plantar fasciitis, flat feet, fallen arches, pronation or anyone just wanting extra cushion. The 7mm heel thickness is recommended for smaller feet, less roomy shoes, people with ball-of-the foot problems.
  • Ladies & mens shoe sizes: 5-6, 7-8, 9-10, 11-12. Insoles can be trimmed to suit using a pair of scissors - it is preferable not to trim the heel area as the tighter the insole is against the footwear, the more it will mould around the curvature of the heel providing extra support. 
  • Provide exceptional cushion, shock absorbency, support and comfort immediately on insertion into shoes but they become FULLY BENEFICIAL when they take on a FULL mould of the contours of an individual's own feet. 
  • The 'moulding-in' period will take approximately three weeks, depending on amount of use. The insoles start to mould down a little the first day, the next.... until there is a full mould of the foot contours. 
  • The centre of the heel will subside to around 7mm (or 4mm) - depending on which thickness is used, providing a natural uplift to the arch area. 
  • EXTRA PADDING is provided to allow for further build-up (IF REQUIRED) under the ARCH and/or BALL-OF-THE FOOT areas (see 'BENEFITS' section).
  • The insoles are suitable inside boots, gum boots, workshoes, joggers and even many dress shoes etc. Initially, the insoles may make "certain" types of footwear feel tight but usually within 2-3 days of wearing-in, they have settled in nicely once a mould of the foot has started. (If a problem fitting them in initially, wearing them in, in looser footwear and then transferring is recommended). The 11mm heel thickness is always recommended but where the 11mm ones are just not suitable, there is a thinner heel thickness available (7mm) which tapers to a little less under the arch area and under the ball of the foot.
  • Durable & washable. To refresh (dependent on amount of compression due to wear) insoles can be placed in boiling water for 1-2 minutes. Being made of a 'closed air-cell' construction, the air in the cells heats up and expands to re-shape the insoles. 
  • If desired, Ultra Cushion insoles that need replacing need not be thrown away but can be placed over newly purchased ones (if shoes will allow for this) providing extra cushion and an already formed 'mould'. 
  • Money-back 30-day guarantee if not satisfied.